Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Ingersoll Rand 285B-S6 1475 ft-lbs Heavy Duty D-Handle Air Impact Wrench, #5 Spline Drive. Actuation/Throttle Type/Switch Type: Inside Trigger, Feather-Touch Trigger Air Consumption @ Load (cfm): 61 cfm Air Consumption @ Load (l/min): 1727 l/min
The Ingersoll Rand 285B-S6 1475 ft-lbs Heavy Duty D-Handle Air Impact Wrench, #5 Spline Drive combines exceptional power, control and durability is great for any garage. They deliver 1,770 ft-lb of maximum torque @ 120 psi, with 5,250RPM free speed and a high-efficiency, 6-vane motor. The swept-back 285B handle provides excellent maneuverability.
The rocking dog’s combination of high inertia and low BPM means this tool can deliver a powerful blow with little air, giving you all the power you want without having to overextend yourself. Designed for the professional with over 1770 ft-lbs of torque for the toughest applications. Built with a steel hammer case and metal housing, this wrench can withstand repeated drops and harsh weather conditions. Durable and Resistant: Phenolic 6-vane motor resist harsh environments for less downtime on the job. A protective rubber boot shields the tool from exterior damage. With multiple retention methods and a 6-inch extended anvil you access hard-to-reach spaces, while maintaining a strong connection to the socket. Feather Touch trigger and 3 position power regulator in both forward and reverse. Ergonomic swept-back handle provides excellent maneuverability. The impact wrench has a free speed of 5,250RPM. Optimized for the vehicle repair industry, heavy trucks, tire lanes, and MRO.
The Ingersoll Rand 285B-S6 1475 ft-lbs Heavy Duty D-Handle Air Impact Wrench, #5 Spline Drive is backed by a 1-year warranty for peace of mind.
| Part Number | 285B-S6 |
|---|---|
| Actuation/Throttle/Switch | Feather-Touch Trigger, Inside Trigger |
| Air Consumption @ Load (cfm) | 61 cfm |
| Air Consumption @ Load | 1727 l/min |
| Air Inlet | 1/2'' NPT |
| Air Pressure (psi) | 120 PSI |
| Anvil Length | 6'' Extended |
| Average Air Consumption | 283 l/min |
| Blows Per Min | 830 BPM |
| Color | Grey |
| Configuration/Handle Type | D-Handle |
| Drive Size | #5 |
| Drive Type | Spline |
| Duty Rating | Heavy Duty |
| End Plates | Cast Iron |
| Exhaust Location | Bottom |
| Hammer Case | Aluminum |
| Housing Material | Aluminum Core with Composite Sleeve |
| Impact Mechanism | Rocking Dog |
| Max Bolt Diameter | 1-1/4'' |
| Max Free Speed | 5250RPM |
| Max Torque | 1770 ft-lbs / 21242 in-lbs / 2400 Nm |
| Min. Hose Size | 3/4'' |
| Motor | Non-Biased |
| Number of Power Settings | 3 |
| Power Source | Air Powered |
| Product Height | 7.2'' / 183mm |
| Product Length | 20.1'' / 511mm |
| Product Weight | 27.8lbs / 12.61kg |
| Product Width | 8.1'' / 206mm |
| Recom. Forward Torque Range | 120-1080 ft-lbs / 1443-12957 in-lbs / 163-1464 Nm |
| Retainer Type | Friction Ring |
| Sound Pressure/Power Db(A) | 107/118 |
| Speed Setting | Variable Speed |
| Standards/Certifications | CE |
| Tool Type | Full-size |
| UPC | 6.63023E+11 |
| Vanes | 6 |
| Vibration Level (m/s2) | 13.3m/s2 |
| Vibration Uncertainy K* | 2.1m/s2 |
| Warranty | 1-year |
The Ingersoll Rand 285B-S6 1475 ft-lbs Heavy Duty D-Handle Air Impact Wrench, #5 Spline Drive combines exceptional power, control and durability is great for any garage. They deliver 1,770 ft-lb of maximum torque @ 120 psi, with 5,250RPM free speed and a high-efficiency, 6-vane motor. The swept-back 285B handle provides excellent maneuverability.
The rocking dog’s combination of high inertia and low BPM means this tool can deliver a powerful blow with little air, giving you all the power you want without having to overextend yourself. Designed for the professional with over 1770 ft-lbs of torque for the toughest applications. Built with a steel hammer case and metal housing, this wrench can withstand repeated drops and harsh weather conditions. Durable and Resistant: Phenolic 6-vane motor resist harsh environments for less downtime on the job. A protective rubber boot shields the tool from exterior damage. With multiple retention methods and a 6-inch extended anvil you access hard-to-reach spaces, while maintaining a strong connection to the socket. Feather Touch trigger and 3 position power regulator in both forward and reverse. Ergonomic swept-back handle provides excellent maneuverability. The impact wrench has a free speed of 5,250RPM. Optimized for the vehicle repair industry, heavy trucks, tire lanes, and MRO.
The Ingersoll Rand 285B-S6 1475 ft-lbs Heavy Duty D-Handle Air Impact Wrench, #5 Spline Drive is backed by a 1-year warranty for peace of mind.
| Part Number | 285B-S6 |
|---|---|
| Actuation/Throttle/Switch | Feather-Touch Trigger, Inside Trigger |
| Air Consumption @ Load (cfm) | 61 cfm |
| Air Consumption @ Load | 1727 l/min |
| Air Inlet | 1/2'' NPT |
| Air Pressure (psi) | 120 PSI |
| Anvil Length | 6'' Extended |
| Average Air Consumption | 283 l/min |
| Blows Per Min | 830 BPM |
| Color | Grey |
| Configuration/Handle Type | D-Handle |
| Drive Size | #5 |
| Drive Type | Spline |
| Duty Rating | Heavy Duty |
| End Plates | Cast Iron |
| Exhaust Location | Bottom |
| Hammer Case | Aluminum |
| Housing Material | Aluminum Core with Composite Sleeve |
| Impact Mechanism | Rocking Dog |
| Max Bolt Diameter | 1-1/4'' |
| Max Free Speed | 5250RPM |
| Max Torque | 1770 ft-lbs / 21242 in-lbs / 2400 Nm |
| Min. Hose Size | 3/4'' |
| Motor | Non-Biased |
| Number of Power Settings | 3 |
| Power Source | Air Powered |
| Product Height | 7.2'' / 183mm |
| Product Length | 20.1'' / 511mm |
| Product Weight | 27.8lbs / 12.61kg |
| Product Width | 8.1'' / 206mm |
| Recom. Forward Torque Range | 120-1080 ft-lbs / 1443-12957 in-lbs / 163-1464 Nm |
| Retainer Type | Friction Ring |
| Sound Pressure/Power Db(A) | 107/118 |
| Speed Setting | Variable Speed |
| Standards/Certifications | CE |
| Tool Type | Full-size |
| UPC | 6.63023E+11 |
| Vanes | 6 |
| Vibration Level (m/s2) | 13.3m/s2 |
| Vibration Uncertainy K* | 2.1m/s2 |
| Warranty | 1-year |
