Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Ingersoll Rand 2135PTIMAX 1100 ft-lbs Pistol Grip Air Impact Wrench, 1/2” Square Drive, Pin Retainer. Actuation/Throttle Type/Switch Type: Trigger Air Inlet: 1/4” NPT Air Pressure (PSI): 90 PSI Anvil Length: Standard Average Air Consumption (cfm): 5
The Ingersoll Rand 2135PTIMAX 1100 ft-lbs Pistol Grip Air Impact Wrench, 1/2” Square Drive, Pin Retainer is powerful, durable and reliable, and will excel in any market.
This wrench’s high torque output and power regulator allow easy control over your tool. With a composite housing and a hammer case made of titanium, this wrench can endure repeated drops and harsh environments. With a twin hammer mechanism and powerful motor, the 2135PTiMAX is built not only for performance, but to last. Comes with a titanium hammer case.
Designed to remove and install threaded fasteners for vehicle repair, general industrial, and facility maintenance applications.
The Ingersoll Rand 2135PTIMAX 1100 ft-lbs Pistol Grip Air Impact Wrench, 1/2” Square Drive, Pin Retainer is backed by a 1-year warranty for peace of mind.
| Part Number | 2135PTIMAX |
|---|---|
| Actuation/Throttle/Switch | Trigger |
| Air Inlet | 1/4'' NPT |
| Air Pressure (psi) | 90 PSI |
| Anvil Length | Standard |
| Average Air Consumption | 142 l/min |
| Blows Per Min | 1250 BPM |
| Color | Grey |
| Configuration/Handle Type | Pistol Grip |
| Drive Size | 1/2'' |
| Drive Type | Square |
| Duty Rating | Maintenance Duty |
| End Plates | Aluminum with Hard-coating |
| Exhaust Location | Bottom |
| Free Speed Sound Press/Power | 109.2 / 120.2 |
| Hammer Case | Titanium |
| Handle Material | Composite |
| Housing Material | Impact and Chemical-Resistant Composite Housing and Patented Steel Reinforced Frame |
| Impact Mechanism | Twin Hammer |
| Impacting Sound Press/Power | 99.8 / 110.8 |
| Max Bolt Diameter | 9/16'' |
| Max Free Speed | 9800RPM |
| Max Pressure | 6.2 bar |
| Max Torque | 780 ft-lbs / 9364 in-lbs / 1058 Nm |
| Min. Hose Size | 3/8'' |
| Motor | Reverse Bias |
| Number of Power Settings | 4 |
| Nut-busting/Breakaway Torque | 1100 ft-lbs / 13196 in-lbs / 1491 Nm |
| Power Source | Air Powered |
| Power to Weight Ratio | 278.48 ft-lbs/lbs |
| Product Height | 7.2'' / 183mm |
| Product Length | 7.35'' / 187mm |
| Product Weight | 3.95lbs / 1.79kg |
| Product Width | 2.7'' / 69mm |
| Recom. Forward Torque Range | 600 ft-lbs / 7196 in-lbs / 813 Nm |
| Retainer Type | Pin Detent |
| Side to Center Distance | 1.37'' / 35mm |
| Speed Setting | Variable Speed |
| Standards/Certifications | CE |
| Tool Type | Full-size |
| UPC | 6.63023E+11 |
| Vanes | 7 |
| Vibration Level (m/s2) | 13.3m/s2 |
| Warranty | 1-year |
The Ingersoll Rand 2135PTIMAX 1100 ft-lbs Pistol Grip Air Impact Wrench, 1/2” Square Drive, Pin Retainer is powerful, durable and reliable, and will excel in any market.
This wrench’s high torque output and power regulator allow easy control over your tool. With a composite housing and a hammer case made of titanium, this wrench can endure repeated drops and harsh environments. With a twin hammer mechanism and powerful motor, the 2135PTiMAX is built not only for performance, but to last. Comes with a titanium hammer case.
Designed to remove and install threaded fasteners for vehicle repair, general industrial, and facility maintenance applications.
The Ingersoll Rand 2135PTIMAX 1100 ft-lbs Pistol Grip Air Impact Wrench, 1/2” Square Drive, Pin Retainer is backed by a 1-year warranty for peace of mind.
| Part Number | 2135PTIMAX |
|---|---|
| Actuation/Throttle/Switch | Trigger |
| Air Inlet | 1/4'' NPT |
| Air Pressure (psi) | 90 PSI |
| Anvil Length | Standard |
| Average Air Consumption | 142 l/min |
| Blows Per Min | 1250 BPM |
| Color | Grey |
| Configuration/Handle Type | Pistol Grip |
| Drive Size | 1/2'' |
| Drive Type | Square |
| Duty Rating | Maintenance Duty |
| End Plates | Aluminum with Hard-coating |
| Exhaust Location | Bottom |
| Free Speed Sound Press/Power | 109.2 / 120.2 |
| Hammer Case | Titanium |
| Handle Material | Composite |
| Housing Material | Impact and Chemical-Resistant Composite Housing and Patented Steel Reinforced Frame |
| Impact Mechanism | Twin Hammer |
| Impacting Sound Press/Power | 99.8 / 110.8 |
| Max Bolt Diameter | 9/16'' |
| Max Free Speed | 9800RPM |
| Max Pressure | 6.2 bar |
| Max Torque | 780 ft-lbs / 9364 in-lbs / 1058 Nm |
| Min. Hose Size | 3/8'' |
| Motor | Reverse Bias |
| Number of Power Settings | 4 |
| Nut-busting/Breakaway Torque | 1100 ft-lbs / 13196 in-lbs / 1491 Nm |
| Power Source | Air Powered |
| Power to Weight Ratio | 278.48 ft-lbs/lbs |
| Product Height | 7.2'' / 183mm |
| Product Length | 7.35'' / 187mm |
| Product Weight | 3.95lbs / 1.79kg |
| Product Width | 2.7'' / 69mm |
| Recom. Forward Torque Range | 600 ft-lbs / 7196 in-lbs / 813 Nm |
| Retainer Type | Pin Detent |
| Side to Center Distance | 1.37'' / 35mm |
| Speed Setting | Variable Speed |
| Standards/Certifications | CE |
| Tool Type | Full-size |
| UPC | 6.63023E+11 |
| Vanes | 7 |
| Vibration Level (m/s2) | 13.3m/s2 |
| Warranty | 1-year |
