Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Ingersoll Rand 2015MAX Low Profile Right Angle Air Impact Wrench, 3/8” Square Drive. Actuation/Throttle Type/Switch Type: Trigger Air Consumption @ Load (cfm): 19 cfm Air Consumption @ Load (l/min): 538 l/min Air Inlet: 1/4” NPT Air Pressure (PSI): 90
The Ingersoll Rand 2015MAX Low Profile Right Angle Air Impact Wrench, 3/8” Square Drive is a revolutionary product unlike any other on the market today. The Hammerhead Low Profile impact wrench offers the power and speed of an impact with the reach of a ratchet. The combination of MAX power, MAX control, and MAX access now allows you to use an Ingersoll Rand impact wrench for virtually any application. Say goodbye to awkward extensions and swivel sockets, and watch your productivity soar as you conquer tasks in minutes that once took you hours.
With 180 ft-lbs of max torque and 9000RPM, the Ingersoll Rand 2015MAX Low Profile Right Angle Air Impact Wrench, 3/8” Square Drive offers more than twice the power of the leading competitor’s ratchet. A feather-touch trigger, two-position forward power regulator and conveniently located forward / reverse ring provide precise control. A head height of under 2” and reactionless torque allow you to safely use this powerful tool in tight spaces. A compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench. Ergonomically sound rear exhaust system. Offering the same reach as a ratchet, this tool is optimized for the vehicle repair industry, body shops, and MRO.
Designed to remove and install threaded fasteners.
The Ingersoll Rand 2015MAX Low Profile Right Angle Air Impact Wrench, 3/8” Square Drive is backed by a 2-year warranty for peace of mind.
| Part Number | 2015MAX |
|---|---|
| Actuation/Throttle/Switch | Trigger |
| Air Consumption @ Load (cfm) | 19 cfm |
| Air Consumption @ Load | 538 l/min |
| Air Inlet | 1/4'' NPT |
| Air Pressure (psi) | 90 PSI |
| Anvil Length | Standard |
| Blows Per Min | 2100 BPM |
| Color | Grey |
| Configuration/Handle Type | Right Angle |
| Drive Size | 3/8'' |
| Drive Type | Square |
| Duty Rating | Maintenance Duty |
| End Plates | Aluminum with Hard-coating |
| Exhaust Location | Bottom |
| Free Speed Sound Press/Power | 94.1 / 105.1 |
| Hammer Case | Aluminum |
| Handle Material | Composite |
| Housing Material | Impact and Chemical-Resistant Composite Housing and Patented Steel Reinforced Frame |
| Impact Mechanism | Single Hammer |
| Impacting Sound Press/Power | 96.6 / 107.6 |
| Max Bolt Diameter | 0.4375'' |
| Max Free Speed | 9000RPM |
| Max Pressure | 6.2 bar |
| Max Torque | 180 ft-lbs / 2160 in-lbs / 244 Nm |
| Min. Hose Size | 3/8'' |
| Motor | Reverse Bias |
| Number of Power Settings | 2 |
| Power Source | Air Powered |
| Product Height | 3.1'' / 79mm |
| Product Length | 13.1'' / 333mm |
| Product Weight | 3.4lbs / 1.54kg |
| Product Width | 2.2'' / 56mm |
| Recom. Forward Torque Range | 45-140 ft-lbs / 540-1682 in-lbs / 61-190 Nm |
| Recommended Reverse Torque | 45-160 ft-lbs / 61-217 Nm |
| Retainer Type | Friction Ring |
| Side to Center Distance | 1.1'' / 28mm |
| Speed Setting | Variable Speed |
| Standards/Certifications | CE |
| Tool Type | Full-size |
| UPC | 6.63023E+11 |
| Vanes | 6 |
| Vibration Level (m/s2) | 17.4m/s2 |
| Warranty | 2-year |
The Ingersoll Rand 2015MAX Low Profile Right Angle Air Impact Wrench, 3/8” Square Drive is a revolutionary product unlike any other on the market today. The Hammerhead Low Profile impact wrench offers the power and speed of an impact with the reach of a ratchet. The combination of MAX power, MAX control, and MAX access now allows you to use an Ingersoll Rand impact wrench for virtually any application. Say goodbye to awkward extensions and swivel sockets, and watch your productivity soar as you conquer tasks in minutes that once took you hours.
With 180 ft-lbs of max torque and 9000RPM, the Ingersoll Rand 2015MAX Low Profile Right Angle Air Impact Wrench, 3/8” Square Drive offers more than twice the power of the leading competitor’s ratchet. A feather-touch trigger, two-position forward power regulator and conveniently located forward / reverse ring provide precise control. A head height of under 2” and reactionless torque allow you to safely use this powerful tool in tight spaces. A compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench. Ergonomically sound rear exhaust system. Offering the same reach as a ratchet, this tool is optimized for the vehicle repair industry, body shops, and MRO.
Designed to remove and install threaded fasteners.
The Ingersoll Rand 2015MAX Low Profile Right Angle Air Impact Wrench, 3/8” Square Drive is backed by a 2-year warranty for peace of mind.
| Part Number | 2015MAX |
|---|---|
| Actuation/Throttle/Switch | Trigger |
| Air Consumption @ Load (cfm) | 19 cfm |
| Air Consumption @ Load | 538 l/min |
| Air Inlet | 1/4'' NPT |
| Air Pressure (psi) | 90 PSI |
| Anvil Length | Standard |
| Blows Per Min | 2100 BPM |
| Color | Grey |
| Configuration/Handle Type | Right Angle |
| Drive Size | 3/8'' |
| Drive Type | Square |
| Duty Rating | Maintenance Duty |
| End Plates | Aluminum with Hard-coating |
| Exhaust Location | Bottom |
| Free Speed Sound Press/Power | 94.1 / 105.1 |
| Hammer Case | Aluminum |
| Handle Material | Composite |
| Housing Material | Impact and Chemical-Resistant Composite Housing and Patented Steel Reinforced Frame |
| Impact Mechanism | Single Hammer |
| Impacting Sound Press/Power | 96.6 / 107.6 |
| Max Bolt Diameter | 0.4375'' |
| Max Free Speed | 9000RPM |
| Max Pressure | 6.2 bar |
| Max Torque | 180 ft-lbs / 2160 in-lbs / 244 Nm |
| Min. Hose Size | 3/8'' |
| Motor | Reverse Bias |
| Number of Power Settings | 2 |
| Power Source | Air Powered |
| Product Height | 3.1'' / 79mm |
| Product Length | 13.1'' / 333mm |
| Product Weight | 3.4lbs / 1.54kg |
| Product Width | 2.2'' / 56mm |
| Recom. Forward Torque Range | 45-140 ft-lbs / 540-1682 in-lbs / 61-190 Nm |
| Recommended Reverse Torque | 45-160 ft-lbs / 61-217 Nm |
| Retainer Type | Friction Ring |
| Side to Center Distance | 1.1'' / 28mm |
| Speed Setting | Variable Speed |
| Standards/Certifications | CE |
| Tool Type | Full-size |
| UPC | 6.63023E+11 |
| Vanes | 6 |
| Vibration Level (m/s2) | 17.4m/s2 |
| Warranty | 2-year |
