Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm. Max Torque Range – American: 18.4 lbf.ft Max Torque Range – S.I.: 25 N.m Max Torque Range – Metric: 2.6 kgf.m Clamp Diameter: 1 – 2” Arm Reach At Inclination 0: 15 1/8” – 21 1/2”
Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm Description:
The Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm, the ultimate solution to enhance your manufacturing line’s efficiency and reduce costly errors.
Manufacturing precision is vital, and with the Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm, you can eliminate product rework and warranties, adding an extra layer of error-proofing to your assembly process. Many assemblies rely on the correct sequence of tightening fasteners to ensure the reliability of the joint, and that’s where our torque arms shine.
Designed specifically for assembly lines with sequential fastening requirements, our poka-yoke device system significantly reduces the risk of improper fastening. It features a position-control system (posi-control device) consisting of a torque arm equipped with an encoder and a user-friendly touch screen posi-control device.
With this system, you gain full control over the tightening sequence and tool position, ensuring every fastener is secured in the correct order. No more worries about missing parts leaving the assembly area – our visual sequence guide displays drawings or photos, guiding your assembly team through the process with ease.
The digital I/O capability allows seamless interfacing with automation controllers and line control systems, making it an integrated part of your manufacturing setup.
By implementing the Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm, manufacturers can confidently detect and eliminate costly screw-fastening errors during the assembly process. These torque arms are designed to reduce the risk of improperly fastened screws, ensuring that each screw is correctly tightened in the precise sequence required.
Using a position control arm is like having a dedicated quality control manager right where you need it most – on the assembly floor. Improve your assembly line’s efficiency, reduce errors, and enhance product reliability with the Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm.
Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm requires companion item: Mountz 260290 DPC-Touch Posi-Control System V2
| Max Torque Range-American | 18.4 lbf.ft |
|---|---|
| Max Torque Range-S.I. | 25 N.m |
| Max Torque Range-Metric | 2.6 kgf.m |
| Clamp Diameter | 1 – 2'' |
| Arm Reach At Inclination 0° | 15 1/8'' – 21 1/2'' |
| Arm Reach @ Inclination 22.5 | 15'' – 20 1/2'' |
| Arm Reach At Inclination 45° | 12 7/8'' – 18 1/2'' |
| Tool Height (IN) | 36.5 |
| Balance Weight Capacity | 2.2 – 4.8 lbs |
The Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm, the ultimate solution to enhance your manufacturing line’s efficiency and reduce costly errors.
Manufacturing precision is vital, and with the Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm, you can eliminate product rework and warranties, adding an extra layer of error-proofing to your assembly process. Many assemblies rely on the correct sequence of tightening fasteners to ensure the reliability of the joint, and that’s where our torque arms shine.
Designed specifically for assembly lines with sequential fastening requirements, our poka-yoke device system significantly reduces the risk of improper fastening. It features a position-control system (posi-control device) consisting of a torque arm equipped with an encoder and a user-friendly touch screen posi-control device.
With this system, you gain full control over the tightening sequence and tool position, ensuring every fastener is secured in the correct order. No more worries about missing parts leaving the assembly area – our visual sequence guide displays drawings or photos, guiding your assembly team through the process with ease.
The digital I/O capability allows seamless interfacing with automation controllers and line control systems, making it an integrated part of your manufacturing setup.
By implementing the Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm, manufacturers can confidently detect and eliminate costly screw-fastening errors during the assembly process. These torque arms are designed to reduce the risk of improperly fastened screws, ensuring that each screw is correctly tightened in the precise sequence required.
Using a position control arm is like having a dedicated quality control manager right where you need it most – on the assembly floor. Improve your assembly line’s efficiency, reduce errors, and enhance product reliability with the Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm.
Mountz 260156 EZ-25RPC EZ-Glider Position Control Torque Arm requires companion item: Mountz 260290 DPC-Touch Posi-Control System V2
| Max Torque Range-American | 18.4 lbf.ft |
|---|---|
| Max Torque Range-S.I. | 25 N.m |
| Max Torque Range-Metric | 2.6 kgf.m |
| Clamp Diameter | 1 – 2'' |
| Arm Reach At Inclination 0° | 15 1/8'' – 21 1/2'' |
| Arm Reach @ Inclination 22.5 | 15'' – 20 1/2'' |
| Arm Reach At Inclination 45° | 12 7/8'' – 18 1/2'' |
| Tool Height (IN) | 36.5 |
| Balance Weight Capacity | 2.2 – 4.8 lbs |